Manual bench saw AFR-E
Cutting machine for stone and ceramic slabs
Manual bench saw with manual head feed by hand wheel for cutting stone, ceramic, marble and granite slabs. Equipped with tilting bridge and water tank with built-in recycling pump.
Head feed
Manual head feed by hand crank, useful cut 3000mm
Beam structure
Heavy duty bridge, ground and rectified on 6 facets.
Manual cutting depth adjustment by plunge mechanism.
Bridge tilt
Bridge tilt for cutting from 90 to 45 degrees
Worktable
Worktable fabricated in strong steel rails, finished with epoxy powder.
Manual bench saw AFR-E for stone and ceramic slabs cutting:
- Useful cut 3000mm;
- Sturdy and compact structure for large slabs working;
- Manual head feed with hand crank.
| Useful cut |
3000 mm (9'8") |
| Diamond blade diameter | 250-300-350 mm (10”–12”–14”) |
| Blade bore size | 25,4 mm (1") |
| Motor power | 2.2 kW = 3HP 1phase |
| Motor rotation speed | 2800rpm 50Hz – 3400rpm 60Hz |
| Standard voltage/ frequency | 230V-50/60Hz - 110V-50/60Hz |
Laser
Laser alignment device mounted on the head shows the blade’s cutting line, battery feed 1,5V.
Device for parallel cuts
Machine can be equipped with a special device that, controlling the movement of the side stop, facilitates the execution of parallel cuts. The side stop runs parallel to the cutting line by means of a special hand wheel.
Side tables with rollers
Side extension table equipped with rollers to facilitate slab movement. Dimensions: 1000 x 458 mm
Galvanized water tank
Galvanized and painted water tank, for the maximum rust resistance.
Side tables
Side tables with side stop for easy slab cutting.
Do you need information about Achilli products? Contact us for technical or commercial information on floor grinders, bench saws and bridge saws.
Guarantee 12 months
Qualified technical support
Training with Achilli technicians
Spare parts always available
Product: Manual bench saw AFR-E