Monoblock bridge saw GOLD for stone slabs cutting

Monoblock bridge saw with automatic head rotation to perform straight cuts in all directions. Manual or automatic head tilt from 90° to 0° for tilted and horizontal cutting with special connection for mounting core drills. High precision head motion on linear guides with recirculating ball slides.

Request Information

Tailored Achilli machines

Request customization

Features
Technical details
Accessories
Gallery
Reviews
Related products

Sturdy Structure

Steel frame, sandblasted and ceramic coated (hot-dip galvanized upon request).

Head rotation

Automatic rotation of the head controlled by cnc. Permits the execution of cuts along different interpolated lines and the execution of cutting programs without any manual operation.

Head motion

High precision head motion, on linear guides (X and Z axes) with recirculating ball slides by means of motors equipped with digital inverters.

Y axis runs on steel guides with bearings.

X and Y axes run on angled rack and pinion.

Head tilt

Manual or automatic head tilt from 90 to 0 degrees for inclined and horizontal cuts, degrees displayed by scale and arrow (manual version) or on the touch screen panel (automatic version).

Macro

Pre-loaded parametric figures such as hexagon, octagon, kitchen top, trapezium, polygon, etc.

Surface profiling

The "PROFILING" environment of the CNC control unit, through the drawing menu, permits to create artistic frames and decorations for funerary art, square columns or capital.

Worktable

Available with fixed or tilting worktable. The worktable can be covered with replaceable marine plywood boards, or ready to pour concrete.

CNC Control

CNC axis control unit with touch-screen colour display for cuts programming. It allows the automatic execution of cutting programs without manual intervention.

Laser alignment device

To achieve an effective cutting optimization, a laser diode mounted on the head shows the blade's cutting line.

Remote pendant control

Machine is available with a remote control unit which, connected to the electrical panel by cable, enables quick head movement when the operator is working far from the control position.

Advantages

GOLD is the new generation 4 or 5 axis bridge saw for cutting stone slabs:

Customizable according to customer requirements;
Monoblock structure for easy installation (does not require foundation);
Automatic head rotation;
Precision Stone Cutting: extremely accurate and consistent stone sawing.
Simple to Operate: GOLD is capable of fully automatic operation or can be operated in a semi-automatic mode to give the operator full control of sawing operations;
Manual or CNC controlled head tilt from 90 to 0 degrees;
1/2” gas connection for mounting core drills and perform an automatic drilling cycle to easily cut corners and remove the tension from the sintered material plates;
Pre-loaded parametric figures such as hexagon, octagon, kitchen top, trapezium, polygon, etc.
Profiling environment of the CNC to create artistic frames and decorations.

Technical details

X axis travel	3500/3900 mm (11'5"/12'8")
Y axis travel	2350 mm (7'8")
Z axis travel	300 mm (12")
Worktable dimensions	3500x2200 mm (11'5"" x 7'2")
Diamond blade diameter	525 mm (20")
Blade bore size	50 mm
Head tilt	90° - 0°
Head rotation	0°- 360°
Main motor power	11kW = 15HP
Main motor variable speed	800 - 3000 rpm
Standard voltage/frequency	3ph. 400V-50/60Hz 230V-60Hz

Accessories

Galvanized frame

Sturdy, monoblock design with hot dipped galvanized frame which will provide many, many years of reliable performance. The hot-dip galvanized frame maximize the machine durability.

Tilting worktable

Motorized and CNC-controlled hydraulic worktable tilt, for easy slab loading. The worktable can be covered with replaceable marine plywood boards, or ready to pour concrete.

Pop-up rollers

Hydraulic motorized pop-up rollers for easy slab loading and positioning.

Drilling: environment of the CNC control unit

Software to perform an automatic drilling cycle. The head of the saw will be set with 1/2" GAS connection and refrigerant fluid passage for the tool and compressed air to facilitate ejection of the material (not retrofittable).

Water tank

Water tank with built in recycling pump for model with fixed worktable.

Incremental milling software expansion

It allows the creation of curves and square, round and elliptical shapes with an incremental cutter.

Rubber covering of the worktable

The replaceable rubber sheets on the bed of the saw provides grip to the material while cutting, avoiding it to move and also reduce vibration. It also acts as a protecting layer for the bed of the saw to avoid it being cut by the blade.

Gallery